Compaq Notebook Series Startup Guide
Notice © 2002 Hewlett-Packard Company. Microsoft, MS-DOS, and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Important Safety Information CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord to connect a modem to the telephone wall jack. In Australia, the notebook must be connected to the Telecommunication Network through a line cord that meets the requirements of ACA Technical Standard TS008. When using your notebook with a telephone connection, always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.
Software Product License Agreement Your HP product contains software programs. CAREFULLY READ THIS LICENSE AGREEMENT BEFORE PROCEEDING TO OPERATE THIS EQUIPMENT. RIGHTS IN THE SOFTWARE ARE OFFERED ONLY ON THE CONDITION THAT THE CUSTOMER AGREES TO ALL TERMS AND CONDITIONS OF THE LICENSE AGREEMENT. PROCEEDING TO OPERATE THE EQUIPMENT INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS.
OWNERSHIP. Customer agrees that he/she does not have any title or ownership of the software, other than ownership of the physical media. Customer acknowledges and agrees that the software is copyrighted and protected under the copyright laws.
U.S. GOVERNMENT RESTRICTED RIGHTS. Use, duplication, or disclosure is subject to HP standard commercial license terms and for non-DOD Departments and Agencies of the U.S. Government, the restrictions set forth in FAR 52.227-19(c)(1-2) (June 1987) Hewlett-Packard Company, 3000 Hanover Street, Palo Alto, CA 94304 U.S.A. Copyright (c) 2000 Hewlett-Packard Company. All Rights Reserved.
Contents Getting Started with Your Notebook..........................................................................1 Identifying Parts of the Notebook .........................................................................2 Series 2100 and N1050v..................................................................................2 Series 2500 ......................................................................................................5 Status Lights ...............................................
Troubleshooting and Maintenance .........................................................................27 Troubleshooting Your Notebook.........................................................................28 Display problems...........................................................................................28 Hard disk drive problems ..............................................................................29 Keyboard and pointing device problems .............................................
Getting Started with Your Notebook Startup Guide 1
Getting Started with Your Notebook Identifying Parts of the Notebook Identifying Parts of the Notebook Series 2100 and N1050v NOTE Components included with the notebook may vary by geographical region and the features you selected. The following illustrations identify the standard external components included with most notebook models. 1 Notebook open/close latch. 7 Hard disk drive. 2 One-Touch buttons. 8 Infrared port (select models only). 3 Keyboard status lights.
Getting Started with Your Notebook Identifying Parts of the Notebook 13 AC adapter jack. 20 Kensington lock slot (security connector). 14 Universal serial bus ports (USB). 21 RJ-11 jack. Connects the modem cable. 15 RJ-45 jack. Connects a network cable. 22 PC Card and CardBus slot and button. 16 S-video out jack. 23 IEEE 1394 port (select models only). 17 Parallel port (LPT1). Use this port for a parallel printer or other parallel device.
Getting Started with Your Notebook Identifying Parts of the Notebook 28 Hard disk drive. 31 Reset button. 29 Battery latch. 32 Docking port (select models only). 30 RAM (memory) cover. 33 Mini-PCI cover (no user parts inside).
Getting Started with Your Notebook Identifying Parts of the Notebook Series 2500 1 Notebook open/close latch. 8 Wireless on-off button and indicator light (select models only). 3 Keyboard status lights. 9 Battery. 4 Power button. Turns the computer on and off. 10 Audio mute button, audio mute light, and volume control. 2 One-Touch buttons. 5 TouchPad, scroll pad, Click buttons, plus on-off button. 6 Main status lights (left to right): power mode, hard disk activity, and battery.
Getting Started with Your Notebook Identifying Parts of the Notebook 14 AC adapter jack. 20 S-video out jack. 15 Two USB ports. 21 Kensington lock slot (security connector). 16 RJ-45 network jack. Connects a network cable. 22 RJ-11 jack. Connects a modem cable. 17 PS/2 port. 23 IEEE 1394 port (select models only). 18 Parallel port (LPT1). Use this port for a parallel printer or other parallel device. 24 PC Card and CardBus slot and buttons. 19 External monitor port.
Getting Started with Your Notebook Identifying Parts of the Notebook 26 Hard disk drive. 29 RAM (memory) cover. 27 Battery latch. 30 Docking port (select models only). 28 Mini-PCI cover (no user parts inside). 31 Reset button.
Getting Started with Your Notebook Identifying Parts of the Notebook Status Lights The notebook includes a number of status lights that report power and battery status, drive activity, and keyboard functions such as Caps Lock and Num Lock. The following diagram shows the main status lights on the front of the notebook. 1 Power mode. • On: the notebook is on (even if the display is off). • Blinking: the notebook is in Standby. • Off: the notebook is off or in Hibernation. 2 Hard disk drive activity.
Getting Started with Your Notebook Identifying Parts of the Notebook The keyboard status lights, located above the keyboard, indicate the states of the keyboard locks. 1 Caps Lock On: Caps Lock is active. 2 Num Lock On: Num Lock is active. (The Keypad Lock must also be on to use the embedded keypad.) 3 Keypad Lock On: The embedded keypad is active (Fn+F8). Num Lock must also be on for the numeric keys. Otherwise, cursor control is active (as marked on an external keyboard).
Getting Started with Your Notebook Setting Up Your Notebook Setting Up Your Notebook WARNING Improper use of keyboards and other input devices has been associated with ergonomic injury. If you are using your notebook as your primary computer, or using it for extended periods, you should use it with a full-sized keyboard, monitor, and mouse. Docking accessories offer quick, easy connections to these devices. This can reduce the risk of ergonomic injury.
Getting Started with Your Notebook Setting Up Your Notebook Step 2: Connect AC power CAUTION Use only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook). Using the wrong AC adapter could damage the notebook or adapter, cause data loss, and may void your warranty. (See the printed document Worldwide Limited Warranty and Technical Support that came with the notebook.) 1. Plug the AC adapter into the notebook. 2.
Getting Started with Your Notebook Setting Up Your Notebook Step 3: Connect a phone line 1. Make sure the telephone line is an analog line, sometimes called a data line. (You must not use a digital line.) 2. Connect the telephone cord (RJ-11) into a telephone jack 3. Plug the other end of the phone cord into the RJ-11 modem jack in the side of the notebook. For details about using the modem, including AT commands, see the Reference Guide on the Documentation Library CD included with your notebook.
Getting Started with Your Notebook Setting Up Your Notebook Step 4: Turn on the notebook Press the power button above the left side of the keyboard. The notebook then boots up, and Windows starts automatically. Hint If your notebook does not turn on when operating on battery power, the battery may be out of power. Plug in the AC adapter and press the power button again. Leave the AC adapter plugged in for at least an hour or up to 3 hours to charge the battery fully.
Getting Started with Your Notebook Using the Documentation Library CD Using the Documentation Library CD Information about using the notebook can be found on the Documentation Library CD included with the notebook. When the Documentation Library CD is inserted into a drive, the CD menu is displayed on the screen after a brief pause. Or you can display the menu manually: 1. Select Start > Run. 2. In the Open field, type: explorer X: (where X is your CD drive designation) 3. Select the file with the “.
Basic Operation Startup Guide 15
Basic Operation Operating Your Notebook Operating Your Notebook You can start and stop your notebook using the power button. However, at certain times you may want to use other methods to start or stop the notebook, depending on power considerations, types of active connections, and startup time. For information on caring for and protecting your notebook, see the “Basic Operation” chapter in the Reference Guide on the Documentation Library CD included with your notebook.
Basic Operation Operating Your Notebook Default power settings Power mode To enter this mode Function ON—Power status light will turn on. Briefly press the power button. Powers on the notebook. OFF—Power status light will turn OFF. Select Start > Turn Off Computer > Turn Off. If the system has stopped responding and Windows shut down procedures cannot be used, press and hold the power button for 4 seconds to turn off the notebook. Powers off the notebook. Standby—Power status light will blink.
Basic Operation Operating Your Notebook To reset the notebook Occasionally, you may find that Windows or the notebook has stopped responding and will not let you turn off the notebook. If this happens, try the following in the order listed: • If possible, shut down Windows: press CTRL+ALT+DEL, and then select Shut Down, Restart. –or, if this fails– • Press the power button for at least 4 seconds until the display shuts down. Unsaved data will be lost. Press the power button again to restart.
Basic Operation Operating Your Notebook To use the TouchPad The TouchPad includes an on-off button so you can turn off the TouchPad to avoid moving the pointer accidentally when you are typing. The indicator light turns off when you turn off the TouchPad. 1 Click buttons. The Click buttons work like the left and right buttons on a standard mouse. 2 TouchPad (touch-sensitive pointing device). 3 TouchPad on-off button and indicator light. 4 Scroll pad.
Basic Operation Operating Your Notebook To use the function hot keys The combination of the Fn key plus another key creates a hot key—a shortcut key sequence—for various system controls. To use a hot key, press and hold Fn, press the appropriate second key, and then release both keys. This hot key Fn+F1 Does this Decreases the display brightness. Fn+F2 Increases the display brightness. Fn+F5 Toggles among the built-in display, an external display, and simultaneous display on both.
Basic Operation Using CDs or DVDs Using CDs or DVDs To play DVD movies If your notebook came with a DVD, or other DVD readable drive, it also includes DVD player software that lets you play DVD movies. Select Start > All Programs > Multimedia > DVD Player > InterVideo WinDVD. Important DVDs can have regional codes embedded in the disc data. These codes prevent DVD movies from being played outside the region of the world in which they are sold.
Batteries and Power Management Startup Guide 23
Batteries and Power Management Using Battery Power Using Battery Power For information about how your notebook regulates power consumption and how you can manually reduce power consumption and extend the life of the notebook battery, see the “Batteries and Power Management” chapter in the Reference Guide on the Documentation Library CD included with your notebook. To check battery status From the battery status light Check the battery status light on the notebook.
Batteries and Power Management Using Battery Power To respond to a low-battery warning The notebook automatically alerts you when the battery power drops to a critically low level. The notebook first emits a high-pitched beep or displays a warning message. Then, if you do not restore power within a short time, the notebook goes into Hibernation.
Troubleshooting and Maintenance Startup Guide 27
Troubleshooting and Maintenance Troubleshooting Your Notebook Troubleshooting Your Notebook This section contains solutions to a few basic problems you might have with your notebook. Try the solutions one at a time, in the order in which they are presented. Here are some other sources of information for troubleshooting: • See the troubleshooting chapter in the Reference Guide on the Documentation Library CD included with your notebook for a more complete list of troubleshooting suggestions.
Troubleshooting and Maintenance Troubleshooting Your Notebook Hard disk drive problems If the notebook hard drive doesn’t spin • Make sure the notebook has power. If necessary, connect the AC adapter, and make sure it is fully plugged into a power source and into the back of the notebook. • Remove and reinsert the hard drive. If files are corrupted • Open My Computer, and the disk you want to scan. Select File > Properties. Select the Check Now box under the Error-checking section of the Tools tab.
Troubleshooting and Maintenance Troubleshooting Your Notebook Performance problems For best performance, your notebook should have at least 128 MB of memory (RAM). If the notebook stops responding • Press CTRL+ALT+DEL and use Task Manager to end the application that is not responding. • Press the power button for at least 4 seconds to turn off and reset the notebook. Unsaved data will be lost. Then press the power button again to turn the notebook back on.
Troubleshooting and Maintenance Troubleshooting Your Notebook • Make sure you’re using only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook). Do not use a 60-watt, 3.16-amp adapter. • Move the notebook away from any nearby heat source. Unplug the AC adapter and allow the battery to cool down. If the battery gets too hot, it will not charge properly. • If available, try another battery and AC adapter.
Troubleshooting and Maintenance Configuring Your Notebook Configuring Your Notebook To run the BIOS Setup utility The BIOS (Basic Input and Output System) Setup utility enables you to make changes to the notebook system configuration, and to tailor the operation of your notebook to your individual work needs. The settings made in BIOS Setup generally control the notebook hardware, and so greatly affect how the notebook operates. 1. Select Start > Turn Off Computer > Restart. 2.
Troubleshooting and Maintenance Reinstalling and Updating Software Reinstalling and Updating Software Your notebook includes two features that allow you to install individual software applications or to restore the entire contents of your hard drive: • QuickRestore System Recovery CD, included with the notebook, allows you to restore your hard drive to the factory image. • Application Recovery utility allows you to restore or install one or several applications at a time.
Index Reinstalling and Updating Software Index AC adapter compatibility, 11 connecting, 11 AC adapter jack location, 3, 6 Acrobat Reader, 14 adjusting brightness, 20 volume, 20 audio volume, 20 audio jacks, 3, 5 audio mute button, 3, 5 battery checking status, 24 installing, 10 location, 5 low power warning, 25 release latch, 4, 7 status lights, 24 troubleshooting, 30 BIOS Setup utility using, 32 boot device order, 18 brightness, adjusting, 20 CD-ROM drive location, 5 COM1 port, 3 computer changing BIOS se
status lights battery charge, 24 keyboard, 5 location, 5 S-video port, 3, 6 TouchPad location, 5 troubleshooting, 29 troubleshooting battery, 30 display, 28 hard disk drive, 29 keyboard, 29 performance, 30 pointing devices, 29 power, 30 startup, 31 turning on computer, 13 36 Startup Guide USB location of ports, 3, 6 location of third port, 5 volume adjusting, 20 volume control, 3, 5 Windows setting up, 13 wireless communication indicator light, 5
