Compaq ProLiant CL1850 Software User Guide

CR3500 Configuration Utility 3-3
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant CL1850 Software User Guide Comments:
Part Number: 157839-001 File Name: d-ch3 CR3500 Configuration Utility.doc Last Saved On: 9/8/99 4:59 PM
CR3500 Configuration Utility Features
There are two methods you can use to run the CR3500 Configuration Utility.
■ SCSI connection—This option is only for systems running
Windows NT.
■ Serial cable connection—For server nodes not running Windows NT, a
separate system running Windows 95/98/NT is required. A serial cable
is used to connect the separate system to the CR3500 RAID controller
through a connection in the back of the shared storage area.
SCSI Connection
The system must be running Windows NT to connect online via the SCSI
interface.
1. Insert the SmartStart CD into the server node.
2. From Windows NT Explorer, go to the CR3500 directory on the
SmartStart CD and run SETUP.EXE. This will install the CR3500
Configuration Utility to the server node.
3. Go to Start, Compaq System Tools, CR3500 Utility to run the utility.
4. A connection window appears (Figure 3-1).
Figure 3-1. CR3500 Configuration Utility SCSI connection
5. Select SCSI and click OK. You will then be taken to the main window
of the utility.