Compaq ProLiant CL1850 Software User Guide

3-12 Compaq ProLiant CL1850 Software User Guide
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant CL1850 Software User Guide Comments:
Part Number: 157839-001 File Name: d-ch3 CR3500 Configuration Utility.doc Last Saved On: 9/8/99 4:59 PM
The CR3500 Configuration Utility uses icons to indicate the status of the disks
in the disk window. The physical drive states and corresponding icons are
shown in Table 3-5.
Table 3-5
Physical Drive States
Drive State Icon State Description
Good Physical drive is operating normally as part of a
logical drive.
Reconstructing Reconstruction data is being written to this
physical drive.
Spare Physical drive is available to replace a failed
physical drive that is a group member.
Failed Physical drive is not available but is installed.
Available Physical drive is available for use in a logical
drive or as a spare.
Icons representing the Shared Storage RAID controllers are arranged just
below the physical drives. The utility uses icons to indicate the status of your
controllers, as shown in Table 3-6.
Table 3-6
Controller status
Controller Status Icon Description
Indicates an operational controller
Indicates a controller that is not operational