Compaq ProLiant CL1850 Software User Guide

CR3500 Configuration Utility 3-29
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant CL1850 Software User Guide Comments:
Part Number: 157839-001 File Name: d-ch3 CR3500 Configuration Utility.doc Last Saved On: 9/8/99 4:59 PM
3. Install the redundant controller in the bottom controller slot of the
shared storage subsystem.
4. Power up the shared storage subsystem.
5. Restore the controller configuration settings that you saved in Step 1.
NOTE: If restoring configuration settings using a serial connection, both controllers must
be attached to the host machine.
Error and Warning Messages
When you start the CR3500 Configuration Utility, the software checks each
controller to detect errors in its configuration. If a problem is found, the
CR3500 Configuration Utility displays an error warning message that
describes the problem.
IMPORTANT: If a warning message indicates “Internal Error Has Been Detected” and
cites an error code number, the problem requires assistance from Compaq technical
support. See the “About This Guide” section at the beginning of this book for technical
support phone numbers.
Refer to the Online Help for more information.