Compaq Factory-Installed Operating System Software for Microsoft Windows 2000 Advanced Server on ProLiant CL380 Servers Installation Guide

Compaq Factory-Installed Software for Windows 2000 Advanced Server on ProLiant CL380 Servers 15

Compaq Confidential – Need to Know Required

Writer: Michele Richardson Project: Compaq Factory-Installed Software for Windows 2000 Advanced Server on ProLiant CL380 Servers Comments:

Part Number: 191234-003 File Name: 192134-003.doc Last Saved On: 3/12/01 11:25 AM

Setting the Speed for an IBM 16/4

Token Ring PCI Special with WOL

Controller

Complete the following steps to set the ring speed for the IBM 16/4 Token

Ring PCI Special with WOL controller.

1. Click Start, then select Programs.

2. Select Administrative Tools, Computer Management, then Device

Manager.

3. Expand the Network Adapters section.

4. Select IBM 16/4 Token Ring PCI Special, then Properties.

5. Select the Advanced tab, then select Network Data Rate.

6. Select either 4Mbps or 16Mbps from the drop-down list on the right,

then click OK.

Installing the AIT 50/100 Tape Drive

If an AIT 50/100 tape drive has been purchased and preinstalled on the server,

support for the tape drive must be installed manually. Follow the procedures

below to complete the installation:

1. Right-click the My Computer icon on the desktop, then select Manage.

2. Select Device Manager from the left side of the Computer

Management screen to display a list all available devices on the right

side of the screen.

NOTE: The tape drive will be listed in the Other Devices category under the question

mark (?) icon, which indicates an unknown device, until the correct driver is installed.

3. Right-click the Compaq SDX-500C SCSI Sequential Device, and

select Properties.

4. Select the Driver tab, then click Update Driver. The Update Device

Driver Wizard begins.

5. Select Display a List of the Known Drivers, then click Next.

6. Scroll down the list of drivers, select Tape Drives, then click Next.

7. Click Have Disk, then type the following path in the text box:

C:\CPQDRVRS