Compaq Factory-Installed Operating System Software for Microsoft Windows 2000 Advanced Server on ProLiant CL380 Servers Installation Guide

16 Compaq Factory-Installed Software for Windows 2000 Advanced Server on ProLiant CL380 Servers
Compaq Confidential – Need to Know Required
Writer: Michele Richardson Project: Compaq Factory-Installed Software for Windows 2000 Advanced Server on ProLiant CL380 Servers Comments:
Part Number: 191234-003 File Name: 192134-003.doc Last Saved On: 3/12/01 11:25 AM
8. Click OK.
9. Select the CompaqAIT50GBDrive,then click Next.
10. Click Next to display the selected device.
NOTE: If an incorrect device is displayed, click Back and reselect the correct device.
11. Click Finish, then click Close to return to the Computer Management
screen.
The tape driver installation is complete. The tape device will now display in
the Tape Drive categoryontheComputer Management screen.
Medium Changer
If your tape drive has a medium changer, the driver for the medium changer
must be installed.
NOTE: The medium changer will be listed on the Computer Management screen as an
Unknown Medium Changer until the correct driver is installed.
To install the medium changer driver:
1. Select Unknown Medium Changer located under the Medium
Changers category in the Computer Management screen device list.
2. Follow the procedure described in the previous section for installing the
tape drive driver.
Installing Client Printer Drivers
The client printer drivers are preinstalled in the Printers directory located on
the hard drive. When installing printer support for client operating systems,
direct the installer to C:\PRINTERS. For additional information on installing
drivers for network shared printers, refer to the Installing Printer Drivers
section of the Help file, which can be accessed by clicking Start,thenHelp.