Compaq Factory-Installed Operating System Software for Microsoft Windows 2000 Advanced Server on ProLiant CL380 Servers Installation Guide

Compaq Factory-Installed Software for Windows 2000 Advanced Server on ProLiant CL380 Servers 17
Compaq Confidential – Need to Know Required
Writer: Michele Richardson Project: Compaq Factory-Installed Software for Windows 2000 Advanced Server on ProLiant CL380 Servers Comments:
Part Number: 191234-003 File Name: 192134-003.doc Last Saved On: 3/12/01 11:25 AM
Event Log Errors
After the installation of drivers is completed, event log error messages that are
related to certain SCSI controller drivers may display. These messages do not
affect the performance of the server or the operating system. Possible
messages are:
■ Driver detected an internal error in its data structures for
\device\scsi\cpq32fs21
■ Driver detected a controller error on \device\scsi\cpq32fs21
■ The device, \device\scsi\adpul60ml, did not respond within the timeout period
■ The device, \device\scsi\cpqfcalm1, did not respond within the timeout period
Networking Information
Protocols
The TCP/IP protocol and SNMP service are automatically installed. The
Compaq Management Agents for Servers require the TCP/IP protocol and
SNMP service to communicate with Compaq Insight Manager and
Compaq Insight Manager XE. To disable the SNMP service, refer to the
operating system documentation. Windows 2000 requires TCP/IP to be
enabled.
Remote Access Service
To use the Remote Access Server (RAS) service with an installed modem, use
the following instructions to configure the server.
1. Click Start, then select Settings.
2. Click Control Panel, then double-click Network.
3. Double-click Dial-up Connections, then Make a New Connection.
4. Select the appropriate network connection type and complete the rest of
the setup as prompted.
Refer to the operating system documentation for more information on required
networking parameters.