Compaq Factory-Installed Operating System Software for Microsoft Windows 2000 Advanced Server on ProLiant CL380 Servers Installation Guide

Compaq Factory-Installed Software for Windows 2000 Advanced Server on ProLiant CL380 Servers 21
Compaq Confidential – Need to Know Required
Writer: Michele Richardson Project: Compaq Factory-Installed Software for Windows 2000 Advanced Server on ProLiant CL380 Servers Comments:
Part Number: 191234-003 File Name: 192134-003.doc Last Saved On: 3/12/01 11:25 AM
Verifying Creation of the Cluster
After the software is installed, complete the following steps to use Microsoft
Cluster Administrator to verify creation of the cluster:
1. Shut down and power down both server nodes.
2. Power down and then power up the shared storage area.
3. Power up both server nodes.
After Windows 2000 finishes booting up on both server nodes, complete the
following steps to use Microsoft Cluster Administrator to verify the creation of
the cluster.
1. From the desktop on either server node, select Start, Programs,
Administrative Tools (Common), then Cluster Administrator.
2. When prompted for the cluster or server name, enter the name or
IP address of one of the clustered virtual servers.
If the cluster has been created correctly, the names of both server nodes
display on the left side of the Cluster Administrator window
(see Figure 2). Note the cluster name.
NOTE: If the names of both server nodes do not display in the Cluster Administrator
window, the cluster has not been created correctly. Refer to the operating system
documentation for troubleshooting information.
Figure 2. Microsoft Cluster Administrator