Compaq Factory-Installed Operating System Software for Microsoft Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers User Guide

12 Factory-Installed Software for Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers
Compaq Confidential – Need to Know Required
Writer: Michele Richardson Project: Factory-Installed Software for Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers Comments:
Part Number: 158514-004 File Name: 158514-4.doc Last Saved On: 8/8/00 10:15 AM
4/8 SLR Tape Drive
1. Click Start to display the Start menu, then select Settings.
2. Select Control Panel, and then select the Tape Devices icon.
3. At the Install Driver screen, scroll down and select Tandberg in the
manufacturers column.
4. Select Tandberg 3660, 3820, 4120, 4220, or 4222 tape drive in the Tape
Devices column.
5. When the driver is loaded, click OK.
The tape driver installation is complete, and the tape drive is available for use.
Installing Additional Options
NOTE: Install any additional options after the operating system installation is complete.
When installing additional options, the source path may display an incorrect
path for installation files. If an incorrect path is displayed, type
C:\I386
All necessary installation files have been placed under this subdirectory for
installation convenience. When new options are installed, whether they are
software or hardware, the Service Pack must be reapplied. The Service Pack
updates Windows NT system files and drivers. Failure to reinstall the Service
Pack can cause a Windows NT error message.
To reapply the Service Pack:
1. Click Start, then Run.
2. Type the following path in the text box, then click OK.
C:\SPACKX\UPDATE\UPDATE.EXE
Read the Microsoft Service Pack Instructions (README.TXT) before
changing or adding system software or hardware components on the server.
Additional information on Microsoft Service Packs and available hot-fixes can
be found on the Microsoft website:
http:\\www.microsoft.com