Compaq Factory-Installed Operating System Software for Microsoft Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers User Guide

Factory-Installed Software for Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers 19
Compaq Confidential – Need to Know Required
Writer: Michele Richardson Project: Factory-Installed Software for Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers Comments:
Part Number: 158514-004 File Name: 158514-4.doc Last Saved On: 8/8/00 10:15 AM
When Windows NT finishes booting up on both nodes, follow these steps to
use Microsoft Cluster Administrator to verify creation of the cluster:
1. From the Desktop on either server node, select Start, Programs,
Administrative Tools (Common), then Cluster Administrator.
2. When prompted for the cluster or server name, enter the name or
IP address of one of the clustered virtual servers.
If the cluster has been created correctly, the names of both server nodes
appear on the left side of the Cluster Administrator window
(see Figure 1). Note the cluster name.
NOTE: If the names of both server nodes do not appear in the Cluster Administrator
window, the cluster has not been created correctly. Refer to the operating system
documentation for troubleshooting information.
Figure 1. Microsoft Cluster Administrator