Compaq Factory-Installed Operating System Software for Microsoft Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers User Guide

24 Factory-Installed Software for Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers
Compaq Confidential – Need to Know Required
Writer: Michele Richardson Project: Factory-Installed Software for Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers Comments:
Part Number: 158514-004 File Name: 158514-4.doc Last Saved On: 8/8/00 10:15 AM
Compaq Support Software
The Compaq SSD for Microsoft Windows NT is automatically installed when
the server software is installed. The Compaq SSD for Windows NT contains
device drivers and utilities that take advantage of specific capabilities offered
on Compaq products. These drivers are provided for use with Compaq
hardware only.
For more information, refer to the Compaq SSD help file (NTREADME.HLP)
located on the hard drive in the C:\SSD directory. To run the Compaq SSD for
Windows NT:
1. Select Start, then Run.
2. Enter:
C:\SSD\SETUP.EXE
3. Follow the instructions on the screen after the setup program launches.
Reinstalling the Software Image and
Operating System
To return the system to its original configuration, use the Compaq
ProLiant CL380 Image Restore CD for Microsoft Windows NT Server 4.0,
Enterprise Edition. This CD contains the software image that was installed by
the factory on the Compaq ProLiant CL380. Refer to the documentation
provided with the Image Restore CD for information on restoring the system
to its original configuration.
If the server operating system becomes corrupted, reinstall it using the
Compaq SmartStart and Support Software CD. See the Server Setup and
Management Pack provided with the server for information on using
SmartStart.
Getting Help
Additional information and other help is available in the following locations.
Compaq Website
To access the Compaq website, log on to the Internet:
http://www.compaq.com