Compaq Factory-Installed Operating System Software for Microsoft Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers User Guide

Factory-Installed Software for Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers 5
Compaq Confidential – Need to Know Required
Writer: Michele Richardson Project: Factory-Installed Software for Windows NT 4.0 Server Enterprise Edition on ProLiant CL380 Servers Comments:
Part Number: 158514-004 File Name: 158514-4.doc Last Saved On: 8/8/00 10:15 AM
The server will reboot and the operating system installation will begin. Follow
the instructions on the screen. Refer to the operating system documentation for
more information.
IMPORTANT: If a data/fax modem was preinstalled on the server, do not select Remote
Access. When prompted to select Network Connection Options, accept the default choice
of Wired to the Network. Refer to the modem installation section later in this guide for
more information.
IMPORTANT: At the Network Configuration and Utility screen, refer to the operating
system documentation to determine which option should be chosen.
IMPORTANT: Make a note of the IP addresses used during the setup process. These
addresses will be needed later during the setup of the Clustering Services. The NICs need
to be placed on different subnets for clustering to function properly.
Some of the setup screens are automatically configured and do not display. To
change the preconfigured entries after installing the operating system, refer to
the online help for instructions. Of the screens that are automatically
configured, the following are examples of what may require later changes:
■ Licensing Mode — This sets the Server License mode to per-server
with a 25-user count. If additional licenses were purchased, apply them
after the initial operating system installation completes. Refer to the
online help or the operating system documentation for information on
adding licenses.
■ Administrator Password Screen — The administrator account
password has been intentionally left blank. Change the password
immediately after the installation has completed. The administrator
password can be changed during the initial setup when entering the
Computer Name. If the password is changed at that time, remember the
new password to log on after the initial setup completes. If the new
password is forgotten, the operating system will have to be reinstalled.