Compaq ProLiant CL380 Software User Guide

System Setup and Configuration for Microsoft Windows NT Server 4.0, Enterprise Edition 1-13
Compaq Confidential – Need to Know Required
Writer: Linda Arnold Project: Compaq ProLiant CL380 Software User Guide Comments:
Part Number: 157839-004 File Name: b-ch1 System Setup and Configuration for Microsoft Windows NT Server 4.0, Enterprise Edition.doc Last
Saved On: 12/14/00 8:47 AM
Uncheck the detected adapter (Intel 82557 based 10/100 Ethernet
PCI Adapter) and install the correct network adapter (Compaq Ethernet
or Fast Ethernet NIC adapters) from the Compaq Server Support for
Microsoft Windows NT 4.0 set of diskettes. The files necessary to
install the correct network adapter are located in the
\NET\INTELNIC folder.
25. After the installation of Windows NT Server 4.0, Enterprise Edition has
completed, you must install Service Pack 3, followed by the Compaq
Server Support for Microsoft Windows NT 4.0 software.
IMPORTANT: You must update the array controller driver using the Custom Update option
of the SSD even if the array controller driver is current.
26. After the operating system and array controller driver have been fully
updated, install the CR3500 Configuration Utility from the SmartStart
and Support Software CD.
NOTE: When using the CR3500 Configuration Utility, it is only necessary to configure the
shared drives during server node 1 setup. When configuring server node 2, the utility
shows the results of the shared drives configured during server node 1 setup.
27. Complete the installation on server node 2 by installing MSCS and the
latest Service Pack, if applicable. Restart the system.
28. To ensure latest Compaq drivers have not been overwritten by the
service pack, rerun the Server Support Software.