Compaq ProLiant CL380 Software User Guide

1-14 Compaq ProLiant CL380 Software User Guide
Compaq Confidential – Need to Know Required
Writer: Linda Arnold Project: Compaq ProLiant CL380 Software User Guide Comments:
Part Number: 157839-004 File Name: b-ch1 System Setup and Configuration for Microsoft Windows NT Server 4.0, Enterprise Edition.doc Last
Saved On: 12/14/00 8:47 AM
Verifying Creation of the Cluster
After the software is installed, use the following steps to verify the creation of
the cluster.
1. Shut down and power down both server nodes.
2. Power down and then power up the shared storage area.
3. Power up both server nodes.
When Windows NT Server 4.0, Enterprise Edition finishes booting up on both
server nodes, follow these steps to use Microsoft Cluster Administrator to
verify creation of the cluster:
1. From the desktop on either server node, select Start, Programs,
Administrative Tools (Common), Cluster Administrator.
2. When prompted for the cluster or server name, enter the name or
IP address of one of the clustered virtual servers.
3. If the cluster has been created correctly, the names of both server nodes
appear on the left side of the Cluster Administrator window
(see Figure 1-1). Note the cluster name.
Figure 1-1. Microsoft Cluster Administrator