Compaq ProLiant CL380 Software User Guide

3-8 Compaq ProLiant CL380 Software User Guide
Compaq Confidential – Need to Know Required
Writer: Linda Arnold Project: Compaq ProLiant CL380 Software User Guide Comments:
Part Number: 157839-004 File Name: d-ch3 System Setup and Configuration for Novell NetWare.doc Last Saved On: 12/14/00 8:49 AM
Verifying Functionality of the Cluster
Now that the software is installed, you can verify the creation of the cluster
from the NHAS Console. All three links under Connection Status will show
CONNECTED. See Figure 3-1.
Figure 3-1. NHAS: Connected
Verifying Direct and NetWare Links
To test Direct Link Disconnect:
1. Remove the network cable from the server’s network card to which
Direct Link is dedicated. The Direct Link status on the NHAS screen
should change from CONNECTED to NOT CONNECTED.
2. Reconnect the network cable to the network card. The Direct Link status
should change from NOT CONNECTED to CONNECTED.
To test NetWare Link Disconnect:
1. Remove the network cable from the server’s network card to which
NetWare Link is dedicated. The NetWare Link status should change
from CONNECTED to NOT CONNECTED.
2. Reconnect the network cable to the network card. The NetWare Link
status should change from NOT CONNECTED to CONNECTED.