Compaq ProLiant CL380 Software User Guide

CR3500 Configuration Utility 4-3
Compaq Confidential – Need to Know Required
Writer: Linda Arnold Project: Compaq ProLiant CL380 Software User Guide Comments:
Part Number: 157839-004 File Name: e-ch4 CR3500 Configuration Utility.doc Last Saved On: 12/14/00 8:50 AM
CR3500 Configuration Utility Features
There are two methods you can use to run the CR3500 Configuration Utility.
■ SCSI connection—This option is only for systems running Windows NT
Server 4.0, Enterprise Edition, or Windows 2000 Advanced Server.
■ Serial cable connection—For server nodes not running Windows NT
Server 4.0, Enterprise Edition or Windows 2000 Advanced Server, a
separate system running the 95, 98, NT, or 2000 version of Microsoft
Windows is required. Use a serial cable to connect the separate system
to the CR3500 RAID controller through a connection in the back of the
shared storage area.
SCSI Connection
The server nodes must be running Windows NT Server 4.0, Enterprise Edition
or Windows 2000 Advanced Server to connect online by means of the
SCSI interface.
1. Insert the SmartStart and Support Software CD into the CD-ROM drive
of the server node.
2. From the Explorer window, go to the CR3500 directory on the
SmartStart and Support Software CD and run SETUP.EXE. This will
install the CR3500 Configuration Utility to the server node.
3. Select Start, Compaq System Tools, CR3500 Utility to run the utility.