Compaq ProLiant CL380 User Guide

4-20 Compaq ProLiant CL380 User Guide
Compaq Confidential – Need to Know Required
Writer: Marcello Frau Project: Compaq ProLiant CL380 User Guide Comments:
Part Number: 118128-003 File Name: e-ch4 Installing Hardware Options.doc Last Saved On: 8/28/00 4:41 PM
Connecting Two Compaq R3000 UPS Units
To connect two Compaq R3000 UPS units to a ProLiant CL380, perform the
following steps.
NOTE: See Figure 4-22 for a view of this UPS cabling.
Connecting Power Supply Cables
1. The Y power splitter cable connects from the left shared storage area
power supply to the power supply in server node 2 (bottom).
2. The Y power splitter cable connects from the right shared storage
area power supply to the power supply in server node 1 (top).
Connecting Serial Cables
1. The serial cable connects from a COM port on server node 1 (top) to
the serial connector on the UPS.
2. The serial cable connects from a COM port on server node 2 (bottom)
to the serial connector on the second UPS.
NOTE: You may choose to use a different set of UPS units.