Compaq ProLiant CL380 User Guide

4-44 Compaq ProLiant CL380 User Guide
Compaq Confidential – Need to Know Required
Writer: Marcello Frau Project: Compaq ProLiant CL380 User Guide Comments:
Part Number: 118128-003 File Name: e-ch4 Installing Hardware Options.doc Last Saved On: 8/28/00 4:41 PM
Table 4-5
Processor and Processor Power Module Slot Locations
continued
Identifier Description
Processor Power Module slot 2 (optional)
Processor slot 1
Processor slot 2 (optional)
Installing a Processor
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
CAUTION: One processor socket in each server node must be populated at all
times. Two empty processor sockets on a server node will result in a failed boot
for that server node.
CAUTION: Each processor must have a corresponding Processor Power
Module. Rebooting the server node without a PPM installed in the corresponding
socket will cause a POST error and prevent the system from booting.
IMPORTANT: Compaq recommends that both server nodes be configured identically.
To install a processor, perform the following steps:
1. Remove the server node. See the “Accessing a Server Node” section
earlier in this chapter.