Compaq ProLiant CL380 User Guide

Installing Hardware Options 4-51
Compaq Confidential – Need to Know Required
Writer: Marcello Frau Project: Compaq ProLiant CL380 User Guide Comments:
Part Number: 118128-003 File Name: e-ch4 Installing Hardware Options.doc Last Saved On: 8/28/00 4:41 PM
In each server node, Slot 1 populated with an NIC that connects the node to
the LAN. Slot 2 is populated with a Dual-Channel Wide Ultra2 SCSI
Controller that connects the server node to the rest of the system.
CAUTION: The boards in slots 1 and 2 of both server nodes are required for the
proper operation of the system. Removing any of these boards will disrupt the
transfer of data to and from the server nodes.
ACT / LINK
B
A
ACT / LINK
B
A
SERVER NODE 2
SERVER NODE 1
4
3
2
1
ACT / LINK
Figure 4-53. Locating expansion slots
Slots 3 and 4 in each server node are available for the installation of expansion
boards.
IMPORTANT: Compaq recommends that both server nodes be configured identically.