Compaq ProLiant CL380 User Guide

4-74 Compaq ProLiant CL380 User Guide
Compaq Confidential – Need to Know Required
Writer: Marcello Frau Project: Compaq ProLiant CL380 User Guide Comments:
Part Number: 118128-003 File Name: e-ch4 Installing Hardware Options.doc Last Saved On: 8/28/00 4:41 PM
4. Connect the two-device terminated cable to the DLT drive.
NOTE: If the tape drive is a non-LVD device see the “Installing a Non-LVD Device” section
earlier in this chapter.
Figure 4-79. Cabling a DLT drive to port 1 with the two-device terminated
cable
5. Replace the 1.44-MB diskette drive.
6. Replace the server node in the system.
NOTE: For detailed instructions on replacing a server node, see the “Replacing a Server
Node” section earlier in this chapter.
7. Reconfigure the system. For more information on reconfiguring your
system, refer to the Compaq ProLiant CL380 Software User Guide.