Compaq ProLiant CL380 User Guide

Cabling Guidelines 5-7
Compaq Confidential – Need to Know Required
Writer: Marcus Bryant Project: Compaq ProLiant CL380 User Guide Comments:
Part Number: 118128-002 File Name: f-ch5 Cabling Guidelines.doc Last Saved On: 8/29/00 3:58 PM
Internal Cabling Matrix
Table 5-3
Internal Cabling for the Compaq ProLiant CL380 Server Node Area
Compaq ProLiant CL380 12/24 DAT Drive, 20/40GB DLT
Drive, 35/70 DLT Drive,
Internal DDS-3 Auto Loader,
and IDE CD-ROM Drive
Ultra2 or Ultra3 SCSI Hot-Plug
Drives
Dual Channel Wide-Ultra
SCSI-2 Controller (Integrated)
SCSI Port 1 or 2
No additional cables are
required. Connect the
two-device cable,
P/N 269157-011, from SCSI Port
1 to the device. Use the 68 to 50
SCSI Adapter.
No additional cables required.
Use the Wide SCSI point-to-point
cables, P/N 166298-013, to
connect SCSI Port 2 to the Ultra2
hot-plug back plane.
Wide-Ultra2 Controller (PCI)
Connect the two-device cable,
P/N 269157-011, from the
internal port of the device. Use
the internal 68 to 50 SCSI
Adapter.
Smart Array 3200 Controller
Smart Array 221 Controller
Smart Array 4200 Controller
64-Bit Dual Channel Wide Ultra2
SCSI Adapter
64-Bit/66 MHz Single Channel
Wide Ultra3 SCSI Adapter
64-Bit/66 MHz Dual Channel
Wide Ultra3 SCSI Adapter
No additional cables are
required. Use the Wide SCSI
point-to-point cable, P/N
166298-013, to connect from
the controller to the Ultra2
hot-plug back plane.
IMPORTANT: All hot-plug hard drives are installed in the hot-plug drive cages only. The
12/24 DAT drive, 20/40-GB DLT drive, 35/70-B DLT drive and IDE CD-ROM drive are
installed in removable media bays only.