Compaq ProLiant CL380 User Guide

5-20 Compaq ProLiant CL380 User Guide
Compaq Confidential – Need to Know Required
Writer: Marcus Bryant Project: Compaq ProLiant CL380 User Guide Comments:
Part Number: 118128-002 File Name: f-ch5 Cabling Guidelines.doc Last Saved On: 8/29/00 3:58 PM
Powering Up the System
To power up the system, perform the following steps:
NOTE: For information on the location and function of LED indicators, see Appendix G,
“Status LED Indicators.”
1. Press the Power On/Standby switch in the shared storage area.
1
2
LINK
ACT
Figure 5-14. Shared storage area and node 1 Power On/Standby switches
2. Check the shared storage Power On/Standby switch LED indicators.
The following settings indicate that the power switch is on and the area
is operational:
 The On/Standby LED turns from amber to green
 Activity light flashes green
3. When the On/Standby LED turns green, listen for the fans to start.
Watch for:
 The hard drive LED indicators turn on and remain lit until the
CR3500 RAID Controller finishes its power on self-test.
 The Shared Storage RAID Controller CR3500 LED indicators will
blink as the Power-On Self-Test (POST) sequence executes. The
heartbeat LED will continue to blink after the sequence is complete.
NOTE: Please refer to the Compaq ProLiant CL380 Troubleshooting Guide for resolving
problems occurring when a fault LED remains on.