Compaq ProLiant CL380 User Guide

KVM Switch F-9
Compaq Confidential – Need to Know Required
Writer: Marcello Frau Project: Compaq ProLiant CL380 User Guide Comments: First Draft
Part Number: 118128-003 File Name: l-appf Updating the KVM Firmware.doc Last Saved On: 8/28/00 4:52 PM
Table F-2
Flag Appearance Settings
Setting Values Effect
Enabled Flag off Flag does not appear.
Ports on Indicates selected port number.
Names on Indicates selected computer by name.
Ports timed Port number displays for 5 seconds
after switching.
Names timed Name displays for 5 seconds after
switching.
Row 0 – 14 Positions the flag vertically on the
screen.
Column 0 – 25 Positions the flag horizontally on the
screen.
Color 0 – 7 Sets the flag color.
Text 0 – 7 Sets the flag text color.
Scanning the Computers
In scan mode, the switch automatically switches from port to port (computer to
computer). You can scan the entire system sequentially or designate a custom
scan pattern by specifying computers and durations.
Placing the Switch in Scan Mode
To place the switch in scan mode:
1. From the Commands menu in the Advanced Menus screen, move the
highlight to Scan.
2. Press Enter.
To cancel the scan mode, press any key (except Print Screen) or move the
mouse; the scan stops at the currently selected computer.