Compaq ProLiant CL380 User Guide

1-14 Compaq ProLiant CL380 User Guide
Compaq Confidential – Need to Know Required
Writer: Marcello Frau Project: Compaq ProLiant CL380 User Guide Comments:
Part Number: 118128-003 File Name: b-ch1 ProLiant CL380 Features.doc Last Saved On: 8/28/00 4:26 PM
Server Nodes
Each server node supports up to six drives:
■ Two available half-height 5.25-inch removable media bays (A and B as
seen in figure 1-10)
NOTE: The removable media bays can be used for one 5.25-inch, full-height device, or
two 5.25 inch, half height devices.
■ An additional 1-inch Ultra2 or Ultra3 SCSI drive that can be plugged
into bays A or B
NOTE: When combining Ultra2 and Ultra3 hard drives, all of the drives are limited to
response times no faster than the maximum burst rate of up to 80 MB/s on the Ultra2
SCSI bus, or the transfer rate of the slowest device in the array.
■ An optional 2x1-inch drive cage that supports up to two 1-inch Ultra2 or
Ultra3 SCSI drives
NOTE: For more information on the optional 2x1 inch hot-plug drive cage, see Chapter 4,
“Installing Hardware Options.”
■ A low-profile IDE CD-ROM drive
■ A 3.5-inch, 1.44-MB diskette drive, installed in the vertical position