Manual

3–4 User’s Guide
Display Configuration
Energy Savers
This paragraph discusses energy saving features, referring to
Figure 1 and using Table 3–2.
Table 3–2: Energy Savers
Display
Properties Sheet
Area Called...
To Use...
Enable Energy
Savers
Click on this check box to activate the energy saver
functions. When you check this box, all three functions
in the group box are activated:
Screen Saver
Click on this radio button to enable the screen saver. By
default this function is not activated.
Turn Off Monitor
Click on this radio button to use this function as an
energy saver. The function works by shutting off the
terminal's display rather than displaying a screen saver.
By default this function is not activated. When Enable
Energy Savers is activated, this function is enabled.
Wait
Adjust the amount of time (in minutes) that elapses
before the energy saver function you have selected
starts. You can enter a number or use the scrolling list.
By default the function is not activated. When it is
activated, the default is 12.
250090-001 Thin Clients Book.book Page 4 Tuesday, July 17, 2001 9:52 AM