User's Manual

8-13
HP 700-92/96 Emulation
When data received from the host or entered through the keyboard reaches the
specified right margin, the cursor will move to the left margin on the next line down
(as long as InhEolWrp is not selected in the HP Settings dialog box and, in the case
of keyboard-entered data, auto line feed mode is enabled).
To specify the right margin, place the cursor in the column for the margin location
and click this button or press F6. The right margin can be reset to column 80 by
pressing F7 (this will also reset the left margin to column 1).
Note: Margins are disregarded when data is transferred from
display memory to the host. The margins will be cleared
when Format mode is enabled.
Clr All Margins - F7
This function will reset both left and right margin settings so that the left margin is in
column 1 and the right margin in column 80.
Key Programming
The keys F1 through F8 and their equivalent buttons can be programmed by the host
or user to perform additional functions to those described in the previous section. The
keys may be assigned a string of alphanumeric characters and/or control codes, and
you can define whether the key string is executed locally or transmitted to the host, or
both. The buttons can also be programmed to display the new functions when in User
Keys mode.
User Keys mode is entered by pressing the F10 key. The f-key buttons displayed on
the screen will change to display the current User Key definitions. If no definitions
have been assigned, either by you or the host, the buttons will just display the legends
of each f-key as shown below.
To define the function of an f-key or equivalent button locally, press the keys Shift +
F10 to display the User Key Definition menu as shown overleaf. The menu can be
exited by pressing F9.
Default Definitions
While this menu is displayed the f-keys and equivalent buttons have the functions
shown by the buttons at the bottom of the window, so pressing F4 or the Default
Values button will cause the default key and button definitions to be asserted. The
default definitions will take effect once the User Key Definition menu is exited.