Manual

C-4
Host Command Summary
DISPLAY
Scroll display down * lines ESC [ * T
Scroll display up * lines ESC [ * S
Select 80 column display mode ESC [ ? 3 l
Select 132 column display mode ESC [ ? 3 h
Select invisible display ESC [ ? 75 l
Select normal colour display mode ESC [ ? 5 l
Select reverse colour display mode ESC [ ? 5 h
Select thin-line graphics in ANSI BBS mode ESC 10 m
Select visible display ESC [ ? 75 h
Set top (*t) and bottom (*b) margin positions ESC [ *t ; *b r
EDITING
Delete * characters from cursor position right ESC [ * P
Delete * lines from cursor position down ESC [ * M
Enable all characters to be erased ESC [ 6 h
Enable erasure of unprotected characters only ESC [ 6 l
End protected area ESC W
Erase * characters & attributes from cursor right ESC [ * X
Erase line portion (0 = from, 1 = to, 2 = all) ESC [ * K
Erase screen portion (0 = from, 1 = to, 2 = all) ESC [ * J
Insert * blank lines ESC [ * L
Insert * space characters ESC [ * @
Protect characters with * attribute(s) ESC [ * }
Select insert mode ESC [ 4 h
Select replace mode ESC [ 4 l
Start protected area ESC V
GENERAL OPERATION
Cancel current ESC sequence & display error CAN
Local echo mode on ESC [ 12 l
Local echo mode off ESC [ 12 h
Reset features (* = * in ESC [ * h commands) ESC [ * l
Reset terminal emulation ESC c
Restore saved features ESC 8
Save features (char. set, attrib's, cursor, origin) ESC 7
Select VT52 mode ESC [ ? 2 l
Select VT100 mode from VT320 mode ESC [ 61 " p
Select VT500 7 bit mode ESC [ 62 ; 1 " p
Select VT500 8 bit mode ESC [ 62 " p
Select VT500 8 bit mode (* can be 0 or 2) ESC [ 62 ; * " p
Select Wyse 60 mode ESC [ 42 h
Set features (* = * in ESC [ * h commands) ESC [ * h
Soft reset ESC [ ! p
Sound audible tone BEL
Transmit rate limited to 150-180 cps ESC [ ? 73 h
Transmit rate unlimited ESC [ ? 73 l