Manual

6-13
Setup Menus
You must specify the Printer Name. The Job Name and User Name entries are
optional (the User Name will default to root if none is specified). You can specify
how many times the LPR protocol will attempt to execute the print job before
cancelling by setting the number of Retries and the number of seconds delay between
each attempt. When Add Banner is selected, information about this print job will be
printed with it. You can display a message box which will indicate the progress of the
print job by selecting Debug Information.
Print Screen
This will perform a print screen.
Print Buffer
This will send a copy of all the data contained in the window buffer to the currently
selected printer.
Auto Print
This toggles auto print mode on and off, as indicated by a tick when auto print mode is
on. Auto print mode causes each line of data to be transmitted to the printer when the
cursor moves to a new line as a result of a carriage return, line feed, vertical tab, or
form feed.
Cancel Print
This will cancel the current Print Screen or Print Buffer function.
Eject Page
This option enables data that has been spooled to the printer to be printed.
Exit
This option will cause the emulator to shut down.