System information

Samba printer
1. Click the Printers tab.
2. If Load LPD Server at boot time is not available, lprng is not installed. You must install lprng to
enable printing.
3. Click Add.
4. Select Samba Printer.
5. Type a Printer Name and Description (optional).
6. Select the appropriate Device Port. If the list is empty, there is no printer connected to the client.
7. Fill in the Samba Server field.
8. Fill in the Shared Printer field.
9. Fill in the User Name, Password and Workgroup fields. These values are determined by your
Windows Server configuration.
10. If necessary, type a driver name in the Windows driver field. Citrix ICA and RDP use this field to
set the printer driver for the session.
NOTE: You must type the Windows driver name exactly as it is on the server.
11. From the Use Filter list, select /usr/lib/lprng/filter/lpf. If NONE is displayed, lprng is not installed.
12. If you want to make this the default printer, select Make Default.
13. If you want the system to automatically translate carriage returns when printing from Linux to
Windows and Windows to Linux, select Translate.
14. If desired, click Test to send a sample job to the printer.
15. Click OK to save changes.
ENWW Printers 25