System information

3. Click OK on the warning.
The following window is displayed:
4. Select Deploy Settings.
5. Click Next.
6. If multiple USB devices are connected, select the target USB flash drive from the list.
7. Click Deploy.
Once image settings have deployed, a notification that the settings have been deployed
successfully and it is safe to remove the USB flash drive appears.
8. Click OK on the notification. The thin client immediately reboots.
NOTE: If you do not remove the USB flash drive before reboot, you are prompted to press any
key. Simply remove the flash drive and press any key to continue rebooting.
ENWW HP ThinState utility 31