User's Manual

ManualsBrandsHP ManualsSoftwareComputer Accessories AA-RTDKA-TE

HSV Element Manager Event Codes

43Storage Management Appliance Software Event Code Definitions Application Notes

2506 880309ca 6 9 ca Storage Cell: %1 Event Code: %2 Description: The state of the internal Logical

Disk associated with the Virtual Disk identified in the handle field has transitioned

to the FAILED state. The value.ul1 field contains the new state: 5 (FAILED). The

value.ul2 field contains the old state. The state values that may be found in the

value.ul2 field are as follows: 1 = Normal 2 = Replacement delay in progress 3 =

Redundancy lost, restore in progress 4 = Redundancy lost, restore stalled 6 =

Creation in progress 7 = Snapshot is inoperative due to lack of snapshot space 8

= Deletion in progress 9 = Capacity change in progress 10 = Inoperative due to

data lost

2507 880309cb 6 9 cb Storage Cell: %1 Event Code: %2 Description: The state of the internal Logical

Disk associated with the Virtual Disk identified in the handle field has transitioned

to the SNAPSHOT OVERCOMMIT state. The value.ul1 field contains the new

state: 7 (SNAPSHOT OVERCOMMIT). The value.ul2 field contains the old state.

The state values that may be found in the value.ul2 field are as follows: 1 =

Normal 2 = Replacement delay in progress 3 = Redundancy lost, restore in

progress 4 = Redundancy lost, restore stalled 5 = Failed 6 = Creation in progress

8 = Deletion in progress 9 = Capacity change in progress 10 = Inoperative due

to device data lost

2508 880309cc 6 9 cc Storage Cell: %1 Event Code: %2 Description: The state of the internal Logical

Disk associated with the Virtual Disk identified in the handle field has transitioned

to the DEVICE DATA LOST state. The value.ul1 field contains the new state: 10

(DEVICE DATA LOST). The value.ul2 field contains the old state. The state values

that may be found in the value.ul2 field are as follows: 1 = Normal 2 =

Replacement delay in progress 3 = Redundancy lost restore, in progress 4 =

Redundancy lost restore, stalled 5 = Failed 6 = Creation in progress 7 =

Snapshot is inoperative due to lack of snapshot space 8 = Deletion in progress 9

= Capacity change in progress

2509 880309cd 6 9 cd Storage Cell: %1 Event Code: %2 Description: The state of the Fibre Channel

port identified in the attribute.value.str field and located on the rear panel of the

HSV110 controller identified in the handle field has transitioned to the FAILED

state. The attribute.type field contains the value 4. The value.ul1 field contains

the new state: 2 (FAILED). The value.ul2 field contains the old state: 1

(NORMAL). Note that the HSV110 controller’s internal identity of the affected

Fibre Channel port is contained in the secondary_id field.

2510 880309ce 2 9 ce Storage Cell: %1 Event Code: %2 Description: The state of the Disk Group

identified in the handle field has transitioned to an INOPERATIVE MARKED state.

The value.ul1 field contains the new Disk Group state. The value.ul2 field

contains the old Disk Group state. The state values that may be found in the

value.ul1 and value.ul2 fields are as follows: 1 = Normal 2 = Disk Group with no

redundancy is inoperative 3 = Disk Group with parity redundancy is inoperative

4 = Disk Group with mirrored redundancy is inoperative 5 = Disk Group with no

redundancy is inoperative, marked for re-use 6 = Disk Group with parity

redundancy is inoperative, marked for re-use 7 = Disk Group with mirrored

redundancy is inoperative, marked for re-use

2511 880309cf 3 9 cf Storage Cell: %1 Event Code: %2 Description: The state of the Physical Disk

Drive identified in the handle field has transitioned to the NOT PRESENT state.

The value.ul1 field contains the new state: 4 (NOT PRESENT). The value.ul2 field

contains the old state. The state values that may be in the value.ul2 field are as

follows: 1 = Normal 2 = Degraded 3 = Failed

2512 880309d0 2 9 d0 Storage Cell: %1 Event Code: %2 Description: The HSV110 controller identified

in the handle field no longer needs attention.

Table 8: HSV Element Manager Event Codes: Controller Events (Continued)

Event

Code

Sev-

erity

SWC

Evt.

No.

Description