Specifications

TouchPad
Description Spare part number
TouchPad for use in models without WWAN (includes cable) 795911-001
TouchPad for use in models with WWAN (includes cable) 792776-001
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
Keyboard/top cover on page 23).
Remove the TouchPad:
1. Position the keyboard/top cover upside down with the front toward you.
2. Remove the two Philllips PM2.0×2.0 broad head screws (1) that secure the TouchPad to the keyboard/
top cover.
NOTE: When removing the TouchPad, make sure the cable is released through the opening in the
keyboard/top cover.
3. Remove the TouchPad and cable (2) by releasing them downward (3) from the top surface of the
keyboard/top cover.
Reverse this procedure to install the TouchPad.
Component replacement procedures 27