Front View: 1. CD-ROM Drive 2. Power LED 3. Drive Activity LED 4. Well ventilated chassis design 5. Full Length Card Retainer 6. HDD controller card (Optional) 7. HP LO 100c Management Card (Optional) 8. Main System Board 9. Rear System Fan 10. 370W Power Supply Rear View: 1. PSU fan 2. PS/2 mouse port 3. PS/2 keyboard port 4. VGA port 5. Serial port A 6. Rear USB 2.0 ports 7. LAN port (RJ-45) 8. HP LO100c Remote Management Card port (Optional) 9. PCI slot covers 10. Power supply outlet 11.
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-0483ENW.pdf Processor Dual-Core AMD Opteron 1210 (1.8 GHz) One of the following Dual-Core AMD Opteron 1214 (2.2 GHz) depending on Model Single-Core AMD Athlon 3500+ (2.2 GHz)* Dual-Core AMD Opteron 1216 (2.4 GHz)* Dual-Core AMD Opteron 1220 SE (2.8 GHz)* * Offered through Configure-To-Order only.
Interfaces Parallel Serial Pointing Device (Mouse, PS2) Graphics Keyboard (PS2) USB Network RJ-45 (Ethernet) Management 0 1 1 1 1 8 total (4 rear, 2 front panel, 2 internal (one for USB Tape connectivity)) NOTE: Internal USB ports are optimal for the attachment of HP USB DAT Tape Drives NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usbsupport.
Server Power Cords 12' country specific, lowline NEMA power cord. NOTE: Rack models ship standard with a 12' IEC cable. Most redundant power supply options ship with a 6' country specific power cord. Localized cables included with geographic specific models in other world regions.
Service and Support This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section. SATA Models ML115 Opteron 1210 NHP-SATA (1P) 437288-xx1 ML115 Opteron 1214 NHP-SATA (1P) 437289-xx1 Processor(s) One of the following depending on Model Cache Memory Memory Storage Controller Hard Drive Internal Storage Optical Drive Form Factor (1) Dual-Core AMD Opteron 1210 (1.8GHz, 2MB Cache) (1) Dual-Core AMD Opteron 1214 (2.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.
Step 3: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Options" section below. NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information.
Memory 2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB) 1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB) 512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB) 432806-B21 432804-B21 432803-B21 Optical Drives CD-RW/DVD-ROM Combo Drive Option Kit 331346-B21 48X CD-ROM Option, Carbon 398972-B21 DVD-RW Drive Option Kit 383974-B21 1.44 MB USB Diskette Drive DC361B NOTE: For the installation of Windows and other OS's, a floppy drive may be required to complete driver installation.
Tape Backup Drives NOTE: Installation of SCSI internal tape drives in a ML115 model requires SCSI controller kit (PN: 374654-B21). NOTE: The SCSI Controller Kit (P/N 374654-B21 cannot be installed in Slot 2 due to proximity to heat sync. NOTE: For complete listing of tape drive offerings see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.
USB Options HP 1GB USB 2.0 Floppy Drive Key HP 256MB USB 2.0 Floppy Drive Key HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver) HP USB 04 Standard Keyboard USB 2.0 4-port HUB 442085-B21 442084-B21 DC172B DT528A#xxx DG954A HP KVM Switch Options HP 1x4 Console Switch AF611A HP PS2 Server Console Cable, 6 foot, 2-Pack AF612A HP USB Server Console Cable, 6 foot, 2-Pack AF613A NOTE: Required for supporting USB peripherals.
Service and Support Hardware Services 4-Hour On-site Service Offerings 13-Hour x 5-Day Coverage, 3 Years (HP Care Pack Services) 24-Hour x 7-Day Coverage, 3 Years Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years Hardware Services 6 Hour Call-to-Repair 24-Hour x 7-Day Coverage, 3 Years, 6 Hour Call-to-Repair Hardware Installation Service HP Install ProLiant ML115 Service NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack.
HP ProLiant ML115 Models NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Standard Memory 512 MB of PC2-5300 DDR2 SDRAM running at 512 MB with ECC capabilities Memory installed (1 x 512 MB SDRAM DIMM). Standard Memory Plus Optional Memory Up to 5120 MB memory is available with the optional installation of PC2-5300 un-buffered ECC DDR2 SDRAM DIMM Memory kits.
1 2 3, 4, 5, 6 48x IDE (ATAPI) CD-ROM Removable Media Bays (1.6" each) Four (4) Non-Hot Plug Drive Bays Drive Support Removable Media DVD + CDRW Drive DVD-RW Drive Quantity Supported Position Supported Controller 2 2 1 or 2 1 or 2 Integrated IDE (ATAPI) Integrated IDE (ATAPI) Hard Drives (SATA Models only) SATA 1.5Gb – Non-Hot Plug Quantity Supported 3.5-inch Up to 4 500GB 7.2K SATA 250GB 7.2K SATA 160GB 7.2K, SATA 80GB 7.
Tape Drives and D2D Backup System NOTE: A SCSI controller needs to be purchased to operate internal SCSI devices in the SATA Models. NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/division/10233.html (Worldwide) Position Controller Controller/HBA Supported Option Kit Part Number Internal USB Tape 2 USB 2.
Part Number Spare Kit Operational Input Voltage Range (Vrms) Frequency Range (Nominal) (Hz) Nominal Input Voltage (Vrms) Max Rated Output Wattage Rating Nominal Input Current (A rms) Max Rated Input Wattage Rating (Watts) Max.
Power ** (see **) HP ProLiant ML115 Fully Configured Fully Loaded System output Wattage 370W (W) Fully Loaded System Input Current 8A @ 115V, 4A @ 230V (A rms) Fully Loaded System Thermal (BTU- 1907BTU Hr) Fully Loaded System VA (Volt-Amp) 920 System Leakage with all power 0.75mA@240V supplies loaded (mA) 0.
System Unit Dimensions (HxWxD) (with feet) Weight (approximate) Input Requirements (per power supply) Line Frequency Rated Input Current BTU Rating SCSI Connectors (SCSI Models only) Power Supply Output Power (per power supply) Temperature Range Relative Humidity (non-condensing) Acoustic Noise 14.46 x 6.88 x 16.76 in (36.7 x 17.5 x 42.6 cm) 23.15 lb (10.
NHP 72GB 3G SAS 15K 72GB 15K 3.5" HDD 431950-B21 Capacity 73,407,856,856 Height 1.0 in (25.4mm) Width 4.0 in. (101.6 mm) Interface SAS Transfer rate 3 Gb/sec synchronous (maximum) Seek time (typical reads,Single track 0.27 ms including settling) Average 3.5 ms Full-stroke 3.
4 port Embedded SATA SATA Protocol controller SATA Ports SATA 2, 3Gb/s 4 internal Port transfer rate 1.5 Gb/s total Maximum Capacity up to 2 TB (4 x 500GB non hot plug SATA HDD) RAID Levels Supported RAID 1+0 (Striping & Mirroring) RAID 1 (Mirroring) RAID 0 (Striping) RAID 5 (Striping with parity) Logical RAID Volumes NOTE: On SATA models with embedded RAID, setup instructions are Supported located in User Guide, CTO RAID is set-up not available. HP ProLiant 100 Series Server User Guide: http://h20000.
Embedded NC320i PCIe Network Interface Gigabit Server Adapter Compatibility 10Base-T/100Base-TX/1000Base-TX IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.