DesignJet T900 and T1500 Printer Series - User guide

Color management from the front panel
You can color-calibrate the loaded paper type from the front panel by pressing , then , then Image
quality maintenance > Calibrate color. See Color calibration on page 87.
The other color options in the front panel can all be found by pressing , then , then Setup >
Printing preferences > Color options.
NOTE: These front panel settings can all be overridden by the printer driver or (with the T1500 series)
Embedded Web Server job submission settings.
T900 series and T1500 series options
●
Color/Grayscale: you can choose to print in color, in shades of gray, or in black and white. Default: Print
in color.
●
Select RGB source prole: you can choose from a selection of RGB source proles recognized by the
printer. Default: sRGB.
●
Emulate printer: you can choose to emulate a dierent HP DesignJet printer. Default: O (no printer
emulation).
TIP: If you have old HP-GL/2 or PostScript les made for a dierent HP DesignJet printer, you can send
them to the printer and use the front panel to turn on the appropriate emulation mode.
T930 PS and T1500PS options (with PostScript or PDF jobs)
●
Select CMYK source prole: you can choose from a selection of CMYK source proles recognized by the
printer. Default: US Coated SWOP v2.
●
Select rendering intent: you can select the rendering intent. Default: Perceptual.
●
Black point compensation: you can turn black point compensation on or o. Default: On.
●
HP Professional PANTONE Emulation: you can turn HP Professional PANTONE Emulation on or o.
Default: On.
ENWW Color management from the front panel 95