DesignJet T900 and T1500 Printer Series - User guide

Information screen
To reach the information screen, press on the home screen.
Information screen dynamic icons
●
Press for information about the paper status.
●
Press for information about the ink cartridge status.
●
Press for information about the printhead status.
●
Press for information about the network status.
●
Press for a list of alerts.
●
Press for information about the printer.
●
Press to view and change printer settings.
Sleep mode
Sleep mode puts the printer into a reduced power state after a period of inactivity, turning o the front-panel
display to save energy. Printer features can be enabled from this mode, and the printer maintains network
connectivity, waking up only as necessary. The printer can be woken from sleep mode by the Power button, by
sending a print job, or by opening the window, the roll cover, or the stacker cover. The printer wakes up in
several seconds, more quickly than if it is completely turned o. While in sleep mode, the Power button blinks.
To change the time that elapses before sleep mode, press , then , then Setup > Front panel
options
> Sleep mode wait time. You can set a time between 1 and 240 minutes; the default time is 30
minutes.
Printer Monitoring (with the Print Spooler) and Remote Printer Management with the HP Utility and Web
JetAdmin continue to be available during sleep mode. Some remote management tasks oer the option of
remotely waking up the printer if needed to perform the task.
Printer software
The following software is provided for your printer:
●
Printer drivers
●
The Embedded Web Server and (alternatively) the HP Utility allow you to:
10 Chapter 1 Introduction ENWW