DesignJet T900 and T1500 Printer Series - User guide

Uninstall the printer software (Windows)
1. Insert the HP Start-up Kit DVD into your DVD drive. If the DVD does not start automatically, run the
setup.exe program in the root folder of the DVD.
2. Navigate to the Software Installation button and press it.
3. Press the Install Software button, and follow the instructions on your screen to uninstall the printer
software.
Connect a computer to the printer by network (Mac OS X)
You can connect your printer to a network under Mac OS X by using the following methods:
●
Bonjour
●
TCP/IP
TIP: Bonjour is are recommended for your local network; TCP/IP is recommended for other networks.
The following instructions apply if you intend to print from software applications using a printer driver. See
Printing on page 60 for alternative ways of printing.
Before you begin, check your equipment:
●
The printer should be set up and on.
●
The Ethernet switch or router should be on and functioning correctly.
●
The printer and the computer should be connected to the (wired or wireless) network. See Connect the
printer to your network on page 15.
Now you can proceed to install the printer software and connect to your printer.
1.
Go to the front panel and press , then . Note the mDNS service name of your printer.
2. Insert the HP Start-up Kit DVD into your DVD drive.
3. Open the DVD icon on your desktop.
4. Your Web browser opens to display the rest of the software installation procedure. You must click
on .Download OS X Installer. Once downloaded, open the installation software to install all required
components onto your system.
5. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a
connection to your printer. Follow the instructions on your screen.
6. When you reach the Select Printer screen, look for your printer's mDNS service name (which you noted in
step 1) in the Printer Name column.
●
If you nd the right name, scroll sideways if necessary to see the Connection Type column, and
check that it shows Bonjour. Then highlight that line. Otherwise, continue searching further down
the list.
●
If you cannot nd your printer's name just click Continue and do setup manually in your System
Preferences later on.
Click Continue.
7. Continue following the instructions on the screen..
8. When the HP Utility Setup Assistant has nished, you can remove the DVD from the DVD drive.
ENWW Uninstall the printer software (Windows) 17