DesignJet T900 and T1500 Printer Series - User guide

●
In the HP DesignJet Utility for Windows: from the Admin tab, select Printer settings > Job
Management > Nest.
●
In the HP Utility for Mac OS X: select Conguration > Printer Settings > Congure Printer Settings >
Job Management > Nest.
●
In the Embedded Web Server: select Setup > Printer settings > Job management > Nest.
●
Using the front panel: press , then , then Setup > Job management > Nest options >
Nesting.
In each case, you will see the following options:
●
In order: pages are nested in the order in which they are sent to the printer. The nested pages are
printed as soon as one of three conditions is met:
◦
The next page will not t on the same row as the other pages already nested.
◦
No page has been sent to the printer during the specied wait time.
◦
The next page is incompatible with the pages already nested (see Nest jobs to save roll paper
(T930, T930 PS and T1500 series) on page 71).
●
Optimized order: pages are not necessarily nested in the order in which they are sent to the printer.
When it receives an incompatible page, the printer holds it and waits for compatible pages to complete
the nest. The nested pages are printed as soon as one of three conditions is met:
◦
The next page will not t on the same row as the other pages already nested.
◦
No page has been sent to the printer during the specied wait time.
◦
The incompatible-page queue is full. The printer can queue up to six incompatible pages while
nesting compatible pages. If it receives a seventh incompatible page, the nest is printed as it is.
●
O: nesting is disabled. This is the default option.
The nesting wait time can be set at the front panel: press , then , then Setup > Job management
> Nest options > Wait time.
TIP: Optimized order uses the minimum amount of paper; however, it may take longer to print because the
printer waits for compatible pages to arrive.
Turn usage information on and o
The printer can send usage information periodically by e-mail. You can request this in the following ways:
●
In the HP DesignJet Utility for Windows: from the Admin tab, select Printer settings > Accounting.
●
In the HP Utility for Mac OS X: select Conguration > Printer Settings > Congure Printer Settings >
Accounting.
●
In the Embedded Web Server: select Setup > Printer settings > Accounting.
In each case, you must set the following options:
●
Send accounting les: On (the default is O)
●
Send accounting les to: a valid e-mail address
●
Send accounting les every: choose a number of days (1–60) or a number of prints (1–500)
ENWW Turn usage information on and o 23