DesignJet T900 and T1500 Printer Series - User guide
me when alert appears” box (as below), the alerts will be available in the HP Printer Monitor, but will not pop
up in the Dock screen.
Control access to the printer
Front-panel security settings
From the front panel, you can press , then , then Security, to control some of the features of the
printer.
●
USB drive: Enable or disable the use of a USB ash drive.
●
Firmware update from USB: Enable or disable rmware updates from a USB ash drive.
●
Internet connection: Enable or disable the Internet connection.
NOTE: If you disable it, you also disable automatic rmware updates, and remote printing.
●
Enable HP Connected: Enable or disable the use of HP DesignJet ePrint with a computer connected
directly to the printer.
●
User sessions: Enable or disable automatic log-out after 1, 3, or 5 minutes.
●
Printer access control: Enable, disable, or change the administrator password.
If an administrator password has been set, it must be given in order to perform the following operations:
●
Change the security settings (including the administrator password itself)
●
Change the conguration of the Internet connection
●
Change the Automatic Firmware Update conguration
●
Enable or disable automatic downloading and/or installation of automatic rmware updates
●
Restore an earlier rmware version
●
Reset factory defaults
NOTE: The administrator password can contain only characters that appear on the front panel's on-screen
keyboard. If you set a new password with the Embedded Web Server, it will reject characters that do not
appear in that limited character set.
Embedded Web Server security settings
From the Embedded Web Server, you can select the Security tab to control access to the printer in various
ways:
ENWW Control access to the printer 25