DesignJet T900 and T1500 Printer Series - User guide

If you have followed these instructions but failed to get through to the Embedded Web Server, see Cannot
access the Embedded Web Server on page 169.
Change the language of the HP Utility
The HP Utility can work in the following languages: English, Portuguese, Spanish, Catalan (Windows only),
French, Italian, German, Polish, Russian, Simplied Chinese, Traditional Chinese, Korean and Japanese.
●
Under Windows, select Tools > Set Language and select a language from the list.
●
Under Mac OS X, the language is changed as for any other application. In System Preferences, select
International and re-launch the application.
Change the language of the Embedded Web Server
The Embedded Web Server can work in the following languages: English, Portuguese, Spanish, Catalan,
French, Italian, German, Polish, Russian, Simplied Chinese, Traditional Chinese, Korean and Japanese. It uses
whichever language you have specied in your Web browser's options. If you have specied a language that it
cannot support, it works in English.
To change the language, you must change your Web browser's language setting. For example, in Internet
Explorer, go to the Tools menu and select Internet Options > Languages. Then ensure that the language you
want is at the top of the list in the dialog box.
Change the sleep mode setting
If the printer is left switched on but unused for a certain period of time, it goes automatically into sleep mode
to save power. To change the time the printer waits before it goes into sleep mode, go to the front panel and
press , then , then Setup > Front panel options > Sleep mode wait time. Select the wait time you
want and then press
OK; you can set the time from 1 to 240 minutes. The default time is 30 minutes.
Change the auto-o setting
To help save energy, the printer is supplied with an auto-o (automatic power management) feature enabled,
which turns the printer o automatically after a period of inactivity. However, when the printer is connected
to a network, the auto-o feature is automatically disabled, to avoid inconveniencing network users.
NOTE: The auto-o feature is dierent from sleep mode: it turns the printer o completely. To turn it back
on, use the Power button as usual.
You can congure the auto-o feature from the front panel: you can set it to turn o the printer after 2 to 12
hours of inactivity, or disable
auto-o entirely. Press , then , then Setup > Front panel options >
Auto-o.
Change the loudspeaker volume
To change the volume of the printer's loudspeaker, go to the front panel and press , then , then
Setup > Front panel options > Speaker volume, and select O, Low, or High.
38 Chapter 5 Personalizing the printer ENWW