DesignJet T900 and T1500 Printer Series - User guide
●
Rotation allows you to rotate the print by any multiple of 90°, or you can choose Automatic, which
rotates the print automatically if that will save paper.
●
Printer margins allows you to change the default printer margins.
NOTE: If you change the settings in this way, the changed settings apply to the current job but are not
saved permanently. You can change the default settings, except for the Output setting, by pressing
, then , then Print from USB preferences.
5
.
To display a preview of the printed job on the front panel, press .
When the preview is displayed, you can press it to zoom in on it. Press it again to zoom out.
6. When you are satised with the print settings, press Start.
7. After printing, you can choose to print another le or go to the job queue. If you print another le
immediately without returning to the home screen, the temporary settings used for the previous le are
used again.
Print from a computer using the Embedded Web Server or HP
Utility (T930, T930 PS and T1500 series)
You can print les in this way from any computer that can access the printer's Embedded Web Server. See
Access the Embedded Web Server on page 37.
From the Embedded Web Server, select the Main tab and then Submit job. From the HP Utility, select Job
Center > Submit Job. You will see the window below.
Press the Add les button to choose the les from your computer that you want to print. The les must be in
one of the following formats:
●
HP-GL/2
●
RTL
●
TIFF
62 Chapter 8 Printing ENWW