DesignJet T900 and T1500 Printer Series - User guide

To print crop lines with nested jobs (see Nest jobs to save roll paper (T930, T930 PS and T1500 series)
on page 71), you must select a dierent option:
●
In the Embedded Web Server: select Setup > Printer settings > Job management > Use crop lines
when nest is enabled > On.
●
Using the front panel: press , then , then Setup > Job management > Nest options >
Enable crop lines > On.
Use paper economically
Here are some recommendations for making economical use of paper:
●
If you are printing relatively small images or document pages, you can use nesting to print them side by
side instead of one after another. See Nest jobs to save roll paper (T930, T930 PS and T1500 series)
on page 71.
●
You may be able to save some roll paper by using the following options:
◦
In the Windows driver dialog: select the Layout/Output tab and then Remove blank areas and/or
Rotate by 90 degrees or Autorotate.
◦
In the Mac OS X Print dialog (non-PostScript printers): select the Finishing panel, then Remove
Blank Areas.
◦
In the Mac OS X PostScript Print dialog (PostScript printers): select the Finishing panel, then
Remove Blank Areas and/or Rotate by 90 degrees.
◦
On the Embedded Web Server's Submit Job page (T930, T930 PS and T1500 series): select
Advanced settings > Roll options > Remove top/bottom blank areas and/or Rotate.
●
If you check the print preview on your computer before printing, you can sometimes avoid wasting paper
on prints containing obvious mistakes. See Preview a print on page 68.
Nest jobs to save roll paper (T930, T930 PS and T1500 series)
Nesting means automatically printing images or document pages side by side on the paper, rather than one
after the other. This is done to avoid wasting paper.
1. Direction of paper ow
2. Nesting o
3. Nesting on
4. Paper saved by nesting
When does the printer try to nest pages?
When both of the following are true:
ENWW Advanced print settings 71