HP DesignJet T790 and T1300 Printer Series - Using your printer

●
Select Alert Settings in the Device List page of the HP Utility for Windows.
●
Select Alert Settings in any alert page displayed by the HP Utility for Windows.
●
Right-click the system tray icon of the HP Utility for Windows, and select Alert Settings.
You can change the settings in the following ways:
●
Turn all alerts on or o.
●
Turn job status alerts on or o (T1300 series only).
●
Turn on or o printer alerts for problems that stop the printer from printing.
●
Turn on or o printer alerts for problems that do not stop the printer from printing.
●
Turn on printer alerts in all circumstances, or only when you are trying to print to the printer aected by the
problem.
Control access to the printer
Front-panel security settings
From the front panel, you can press , then , then Setup > Security, to control some of the features of
the printer.
●
USB drive: Enable or disable the use of a USB ash drive.
●
Firmware upgrade from USB: Enable or disable rmware updates from a USB ash drive.
●
Enable Internet connection: Enable or disable the Internet connection.
NOTE: If you disable it, you also disable automatic rmware upgrades and HP ePrint.
●
Printer access control: Enable, disable, or change the administrator password.
If an administrator password has been set, it must be given in order to perform the following operations:
●
Change the security settings (including the administrator password itself)
●
Change the conguration of the Internet connection
●
Change the Automatic Firmware Update conguration
●
Enable or disable automatic downloading and/or installation of automatic rmware updates
●
Restore an earlier rmware version
●
External hard disk options
●
Reset factory defaults
NOTE: The administrator password can contain only characters that appear on the front panel's on-screen
keyboard. If you set a new password with the Embedded Web Server, it will reject characters that do not appear
in that limited character set.
Embedded Web Server security settings
From the Embedded Web Server, you can select the Security tab to control access to the printer in various ways:
ENWW Control access to the printer 25