HP DesignJet T790 and T1300 Printer Series - Using your printer
Change the language of the front-panel display
There are two possible ways to change the language of the front-panel menus and messages.
●
If you can understand the current front-panel display language, press , then , then Setup > Front
panel options > Select language.
●
If you cannot understand the current front-panel display language, start with the printer powered o. Press
the Power key to turn it on. When you see icons appear on the front panel, press and then . The front
panel acknowledges this sequence by turning the icons on and o rapidly.
Whichever method you used, the language selection menu should now appear on the front-panel display. Press
your preferred language.
Access the HP Utility
The HP Utility enables you to manage your printer from a computer with a USB, TCP/IP or Jetdirect connection.
●
Under Windows, start the HP Utility from your desktop shortcut or from Start > All Programs > HP > HP
Utility > HP Utility. This launches the HP Utility, showing the printers installed on your computer.
●
Under Mac OS, launch the HP Utility from your dock shortcut or by selecting STARTUP_DISK > Library >
Printers > hp > Utilities > HP Utility. This launches the HP Utility, showing the printers installed on your
computer.
When you select your printer in the left pane, everything that appears in the right pane is specic to that
printer.
If you have followed these instructions but failed to get through to the HP Utility, see Cannot access the HP Utility
on page 164.
Access the Embedded Web Server
The Embedded Web Server enables you to manage your printer remotely using an ordinary Web browser running
on any computer.
To access the Embedded Web Server directly, you must have a TCP/IP connection to your printer. However, you
can access the Embedded Web Server indirectly through the HP Utility, if you connect to your printer with a USB
connection.
The following browsers are known to be compatible with the Embedded Web Server:
●
Internet Explorer 6 for Windows XP, and later
●
Safari 2 for Mac OS X 10.5, and later
●
Firefox 2.0 and later
●
Google Chrome 1.0 and later
The Adobe Flash plugin version 7 or later is recommended for viewing job previews.
To access the Embedded Web Server on any computer, open your Web browser and give the IP address of your
printer.
You can see your printer's IP address on the front panel by pressing and then .
If you have followed these instructions but failed to get through to the Embedded Web Server, see Cannot access
the Embedded Web Server on page 164.
28 Chapter 4 Personalizing the printer ENWW