HP DesignJet T790 and T1300 Printer Series - Using your printer

Introduction
There are ve dierent ways in which you can choose to print, depending on your circumstances and
preferences.
●
Print a TIFF, JPEG, HP-GL/2, RTL, PDF or PostScript le directly from a USB ash drive. See Print from a USB
ash drive on page 47.
●
Print a le that is already in the job queue. See Reprint a job from the queue on page 64.
●
Print a TIFF, JPEG, HP-GL/2, RTL, PDF or PostScript le directly from a computer connected to the printer,
using the Embedded Web Server or the HP Utility. See
Print from a computer using the Embedded Web
Server or HP Utility (T1300 series) on page 48.
●
Print any kind of le from a computer connected to the printer by network or USB cable, using a software
application that can open the le, and a printer driver supplied with your printer. See Print from a computer
using a printer driver on page 49.
NOTE: To print PDF or PostScript les, a PostScript printer is required.
Print from a USB ash drive
1. Insert a USB ash drive containing one or more TIFF, JPEG, HP-GL/2, RTL, PDF or PostScript les into one of
the printer's USB ports.
NOTE: To print PDF or PostScript les, a PostScript printer is required.
NOTE: The use of USB ash drives with your printer may be disabled by the administrator: see Control
access to the printer on page 25.
2.
At the front panel, go to the home screen and press .
3. Select the le to be printed. Files that can be printed are indicated with ; les that cannot be printed are
indicated with . You can press folders to browse their contents.
4. The default print settings are displayed. If you want to change them, press Settings. The following settings
are available:
●
Size allows you to resize the print in two dierent ways: to a percentage of its original size, or to t a
particular paper size. The default is 100% (its original size).
●
Color allows you to choose color or grayscale printing.
●
Print quality allows you to set the print quality to Best, Normal or Fast.
●
Roll allows you to specify printing on roll 1 or roll 2, or you can choose Save paper, which
automatically chooses the narrowest roll on which the print will t.
●
Rotation allows you to rotate the print by any multiple of 90°, or you can choose Automatic, which
rotates the print automatically if that will save paper.
NOTE: If you change the settings in this way, the changed settings apply to the current job but are not
saved permanently. You can change the default settings by pressing , then , then Print from USB
preferences.
5.
To display a preview of the printed job on the front panel, press .
When the preview is displayed, you can press it to zoom in on it. Press it again to zoom out.
ENWW Introduction 47