HP DesignJet T790 and T1300 Printer Series - Using your printer
6. When you are satised with the print settings, press Start.
7. If two rolls are loaded, you can choose to print on either roll, or you can let the printer choose
automatically.
NOTE: The printer will automatically rotate the image by 90° if it can save paper by doing so.
8. After printing, you can choose to print another le or go to the job queue. If you print another le
immediately without returning to the home screen, the temporary settings used for the previous le are
used again.
Print from a computer using the Embedded Web Server or HP Utility
(T1300 series)
You can print les in this way from any computer that can access the printer's Embedded Web Server. See Access
the Embedded Web Server on page 28.
From the Embedded Web Server, select the Main tab and then Submit job. From the HP Utility, select Job Center >
Submit Job. You will see the window below.
Press the Add les button to choose the les from your computer that you want to print. The les must be in one
of the following formats:
●
HP-GL/2
●
RTL
●
TIFF
●
JPEG
●
PDF (PostScript printers only)
●
PostScript (PostScript printers only)
NOTE: When you print to a le, the le should be in one of the above formats, but its name may have an
extension such as .plt or .prn.
If the les are not in one of these formats, they will not be printed successfully.
If the jobs have been generated with the appropriate settings (such as page size, rotation, resizing and number
of copies), you can just press the Print button and they will be sent to the printer.
48 Chapter 7 Printing ENWW