HP DesignJet T790 and T1300 Printer Series - Using your printer

The other color options in the front panel can all be found by pressing , then , then Setup > Printing
preferences > Color options.
NOTE: These front panel settings can all be overridden by the printer driver or (with the T1300 series)
Embedded Web Server job submission settings.
T790 series and T1300 series options
●
Color/Grayscale: you can choose to print in color or in shades of gray. Default: Print in color.
●
Select RGB source prole: you can choose from a selection of RGB source proles recognized by the printer.
Default: sRGB (HP).
●
Emulate printer: you can choose to emulate a dierent HP DesignJet printer. Default: O (no printer
emulation).
TIP: If you have old HP-GL/2 or PostScript les made for a dierent HP DesignJet printer, you can send
them to the printer and use the front panel to turn on the appropriate emulation mode.
T1300 PS options (with PostScript or PDF jobs)
●
Select CMYK source prole: you can choose from a selection of CMYK source proles recognized by the
printer. Default: US Coated SWOP v2.
●
Select rendering intent: you can select the rendering intent. Default: Perceptual.
●
Black point compensation: you can turn black point compensation on or o. Default: On.
●
HP Professional PANTONE Emulation: you can turn HP Professional PANTONE Emulation on or o. Default:
On.
ENWW Color management from the front panel 79