HP DesignJet T790 and T1300 Printer Series - Using your printer

7. In the Paper/Quality tab, check the Show preview before printing box, and select the paper type that you
intend to use.
NOTE: If you select neither the paper source nor the paper type, the printer will not print on any protected
roll (see Roll protection (T1300 series) on page 59).
8. Select the print quality (your own choice between speed and quality of printing).
9. If you intend to print on roll paper, you must decide where the printer should cut the paper. Press the
Margins/Layout button and select Clip contents by margins.
86 Chapter 11 Practical printing examples ENWW