HP Officejet Pro X551 Series Printers - IT Administrators Embedded Web Services Guide

5. Specified an access code between four to eight digits long, and then click Apply.

Note: Local Device supports up to 50 users.

Edit Local Device user account

1. On the Access Control page, scroll down to the Printer User Accounts section.

2. Click Edit.

3. Change account information, and then click Apply.

Delete Local Device user account

1. On the Access Control page, scroll down to the Printer User Accounts section.

2. Select the checkbox beside the user account name, and then click .

LDAP sign-in method

Use this option to enable or disable the LDAP sign-in method and configure the settings that the

device uses to establish a connection with the LDAP server, authenticate users, and search the

LDAP server database.

Note: By default, the LDAP sign-in method is disabled.

Enable and configure the LDAP sign-in method

1. Click Setup in the LDAP Status cell.

2. Select the Enable LDAP Sign In checkbox.

3. In the LDAP Server Address box, enter the IP address or hostname of the LDAP server. The

LDAP server address cannot contain the following characters:

& < > ;

4. In the Port box, enter the port number that the LDAP server monitors for queries. The

default is port 389.

5. To enable SSL/TLS, select the Always use secure connection (SSL/TLS) checkbox.

-Or-

To disable SSL/TLS, clear the Always use secure connection (SSL/TLS) checkbox.

Note: When SSL/TLS is enabled, Server’s CA certificate needs to be imported into the

printer.

6. In the Server Authentication Requirement section, select one of the following options:

 Use Printer User's Credentials: The printer uses the credentials of the user who is

signed in on the printer to authenticate to the LDAP server.

In the Bind Prefix box, enter the bind prefix. The bind prefix cannot contain the

following characters:

& < > ;

 Use LDAP Administrator’s Credentials: The printer uses the LDAP Administrators

credentials to authenticate to the LDAP server.

In the User Name box, enter the LDAP administrator name.