HP Color LaserJet Enterprise M651 - User Guide

3. Load paper into the tray. Check the paper to
verify the guides lightly touch the stack, but do
not bend it. For information about how to orient
the paper, see
Table 2-2 Tray 2 and the 500-
sheet trays paper orientation on page 19.
NOTE: To prevent jams, do not overfill the tray.
Be sure that the top of the stack is below the tray
full indicator.
NOTE: If the tray is not adjusted correctly, an
error message might appear during printing or
the paper might jam.
4. Close the tray.
5. The tray configuration message displays on the
product control panel.
6. Touch the OK button to accept the detected type
and size, or touch the Modify button to choose a
different paper size or type.
For custom-size paper, you need to specify the X
and Y dimensions for the paper when the prompt
displays on the product control panel.
Y
X
7. Select the correct type and size, and then touch
the OK button.
18 Chapter 2 Paper trays ENWW