User manual

●
No direct connection exists between the fax line and any devices that are connected to the USB or
Ethernet ports.
●
The internal firmware cannot be modified through the fax connection.
●
All fax communications go through the fax subsystem, which does not use Internet data-exchange
protocols.
Fax from the flatbed scanner
1. Place the document face-down on the scanner glass.
2. From the Home screen on the product control panel, touch
the Fax button.
3. Use the keypad to enter the fax number.
4. Touch the Start Fax button.
5. The product prompts you to confirm that you are sending
from the scanner glass. Touch the Yes button.
6. The product prompts you to load the first page. Touch the OK
button.
7. The product scans the first page and then prompts you to
load another page. If the document has multiple pages, touch
the Yes button. Continue this process until you have scanned
all the pages.
8. When you have scanned the last page, touch the No button at
the prompt. The product sends the fax.
ENWW Use fax 135